Vehicle speed control: Accelerator pedal09/22/201414V583000
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2014 Infiniti M35 hybrid vehicles manufactured April 7, 2012, to September 9, 2013, 2014 Infiniti Q50 hybrid vehicles manufactured December 10, 2012, to July 15, 2014, and 2014-2015 Infiniti Q70 hybrid vehicles manufactured April 9, 2010, to May 7, 2014. Due to a software error, In the affected vehicles, if the signal is lost from one of the two throttle position sensors (TPS), the engine control module (ECM) will go into a fail-safe mode, partially closing the throttle chamber. Should the lost signal be restored, the throttle chamber may open, regardless of the position signal from the TPS.
Consequence
The vehicle may gradually accelerate due to the throttle chamber reopening. This unexpected acceleration may increase the risk of a crash.
Remedy
Nissan will notify owners, and dealers will reprogram the ECM, free of charge. The recall began on November 10, 2014. Owners may contact Nissan customer service at 1-800-647-7261.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Engine and engine cooling: Engine09/22/201414V583000
Nissan North America, Inc. (Nissan) is recalling certain model year 2013-2014 Infiniti M35 hybrid vehicles manufactured April 7, 2012, to September 9, 2013, 2014 Infiniti Q50 hybrid vehicles manufactured December 10, 2012, to July 15, 2014, and 2014-2015 Infiniti Q70 hybrid vehicles manufactured April 9, 2010, to May 7, 2014. Due to a software error, In the affected vehicles, if the signal is lost from one of the two throttle position sensors (TPS), the engine control module (ECM) will go into a fail-safe mode, partially closing the throttle chamber. Should the lost signal be restored, the throttle chamber may open, regardless of the position signal from the TPS.
Consequence
The vehicle may gradually accelerate due to the throttle chamber reopening. This unexpected acceleration may increase the risk of a crash.
Remedy
Nissan will notify owners, and dealers will reprogram the ECM, free of charge. The recall began on November 10, 2014. Owners may contact Nissan customer service at 1-800-647-7261.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Power train: Driveline: Driveshaft06/21/202424V470000
Nissan North America, Inc. (INFINITI) is recalling certain 2011-2013 M56, 2012-2013 M35 Hybrid, 2014-2018 Q50, Q70 Hybrid, 2014-2019 Q70, and 2015-2019 Q70L two-wheel drive vehicles. The driveshaft can fatigue and break.
Consequence
A broken driveshaft can result in a loss of drive power, or a vehicle roll away when the vehicle is in park without the parking brake applied. Both scenarios can increase the risk of a crash.
Remedy
Dealers will replace the driveshaft, free of charge. Owner notification letters were mailed August 13, 2024. Owners may contact INFINITI's customer service at 1-800-662-6200. INFINITI's numbers for this recall are R24A5 and R24A7.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.