Exterior lighting: Lighting control module: Software06/26/202525V436000
PACCAR Incorporated (PACCAR) is recalling certain 2024-2026 Kenworth T480, T680, T880, W990, Peterbilt 520, 536, 537, 548, 567, 579, 589, 2025 Kenworth T180, Peterbilt 535, 2025-2026 Kenworth T280, T380 and L770 vehicles. The tail brake light, upper and lower beam headlights, reverse light, and turn signal may not illuminate as intended. In addition, the lift axles, if lowered, may revert to a raised position, or oscillate up and down when the signal warning lights are activated. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices and Associated Equipment."
Consequence
Delayed and unsteady headlights can result in insufficient illumination of the road, decreasing the driver's visibility and increasing the risk of a crash. In addition, an unexpected position change of the lift axles may increase the risk of injury.
Remedy
Dealers will update the VCU software, free of charge. Owner letters were mailed August 19, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's number for this recall is 25PACF.
Exterior lighting: Lighting control module: Software01/29/202525V041000
PACCAR Incorporated (PACCAR) is recalling certain 2025 Kenworth T180, Peterbilt 535, 567, 2025-2026 Kenworth T280, 2023-2026 Kenworth T380, 2024-2026 Kenworth T480, 2024-2026 Peterbilt 536, 537, and 548 trucks. The exterior lighting switch may fail, resulting in the hazard lights and the instrument display back-light brightness adjustment not functioning. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 101, "Control and Displays" and 108, "Lamps, Reflective Devices and Associated Equipment."
Consequence
Inoperative hazard lights cannot alert other drivers as intended. In addition, the inability to adjust the brightness on the instrument panel display can make it difficult to see critical safety information or distract the driver. Both scenarios can increase the risk of a crash.
Remedy
Dealers will update the vehicle cab controller unit (VECU) software, free of charge. Owners are advised that a non-responsive switch can be temporarily reset by a key cycle. Owner notification letters were mailed March 26, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 25KWB and 25PBB.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Electrical system: Instrument cluster/panel01/29/202525V041000
PACCAR Incorporated (PACCAR) is recalling certain 2025 Kenworth T180, Peterbilt 535, 567, 2025-2026 Kenworth T280, 2023-2026 Kenworth T380, 2024-2026 Kenworth T480, 2024-2026 Peterbilt 536, 537, and 548 trucks. The exterior lighting switch may fail, resulting in the hazard lights and the instrument display back-light brightness adjustment not functioning. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 101, "Control and Displays" and 108, "Lamps, Reflective Devices and Associated Equipment."
Consequence
Inoperative hazard lights cannot alert other drivers as intended. In addition, the inability to adjust the brightness on the instrument panel display can make it difficult to see critical safety information or distract the driver. Both scenarios can increase the risk of a crash.
Remedy
Dealers will update the vehicle cab controller unit (VECU) software, free of charge. Owners are advised that a non-responsive switch can be temporarily reset by a key cycle. Owner notification letters were mailed March 26, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 25KWB and 25PBB.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.
Exterior lighting: Hazard flashing warning lights: Switch01/29/202525V041000
PACCAR Incorporated (PACCAR) is recalling certain 2025 Kenworth T180, Peterbilt 535, 567, 2025-2026 Kenworth T280, 2023-2026 Kenworth T380, 2024-2026 Kenworth T480, 2024-2026 Peterbilt 536, 537, and 548 trucks. The exterior lighting switch may fail, resulting in the hazard lights and the instrument display back-light brightness adjustment not functioning. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 101, "Control and Displays" and 108, "Lamps, Reflective Devices and Associated Equipment."
Consequence
Inoperative hazard lights cannot alert other drivers as intended. In addition, the inability to adjust the brightness on the instrument panel display can make it difficult to see critical safety information or distract the driver. Both scenarios can increase the risk of a crash.
Remedy
Dealers will update the vehicle cab controller unit (VECU) software, free of charge. Owners are advised that a non-responsive switch can be temporarily reset by a key cycle. Owner notification letters were mailed March 26, 2025. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 25KWB and 25PBB.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to nhtsa.gov.